During the construction of high rise structures, substantial debris is created on the floors of the building. Standard vertical screens or vertical barriers typically are 42” tall and moderately effective. Debris is often knocked or blown over the top of these barriers creating a hazard to workers, public and the surrounding properties below. The “Floor to Ceiling” containment panels provide complete containment of project debris as well as workers. Multiple floors are often protected while work is progressing prior to clean up. Once clean-up is complete the netting is rotated upward ahead of the cladding or glazing operations as the structure progresses upward. Additionally, the fi ne mesh panels help reduce wind speeds on the floor and the associated hazards to workers. The custom fabricated panels are easily installed to a top and bottom cable and are reusable throughout the life of the project. The net system has a 3-layer construction and it exceeds the strength requirements for a guardrail systems. In addition, this system meets the requirements as specified by NFPA 701 for fire retardants, is UV stabilized and has a high chemical resistance for added safety.
Sinco™ Floor-To-Ceiling Debris Net 9-1/2 x 30 ft. (2.9 x 9.1 m)
9-1/2 x 30 ft. (2.9 x 9.1 m) floor-to-ceiling debris net system, 3-layer netting with snap hooks. PRODUCT HIGHLIGHTS 9-1/2 x 30 ft. (2.9 x 9.1 m) floor-to-ceiling debris net system Increases public safety by...
Product Code: 4102000
Sinco™ Floor-To-Ceiling Debris Net Attachment Kit Only pack of 16
Attachment kit for floor-to-ceiling debris net system, includes 16 tie-down plates. PRODUCT HIGHLIGHTS Attachment kit for floor-to-ceiling debris net system Includes 16 tie-down plates Compact and lightweight materials Easily installed without special tools Order 4102000...
Product Code: 4195436
DBI Sala - 3M Catalog
Download the DBI Sala - 3M Catalog.
DBI Sala - 3M Catalog
Fall Protection Technical Publications
- Eliminating the risk of falling; the first step to working at heights
- Eliminating the risk of falling: Form
- Eliminating the risk of falling; Presentation; the first step to working at heights
Capital Safety, the Capital Safety logo, DBI-SALA and Protecta are the worldwide trademarks or registered trademarks of Capital Safety.
Note: Barry sells to companies, professionals, and governments only (Minimum quantities may apply to some products, $500 minimum purchase, sales by phone or on our website only).
Note: This information is for reference only and is subject to change without prior notice.
Note: Any Barry document received by email, downloaded or printed is uncontrolled.